Safecom’s Waterproof Mini P.S is a most efficient and
cost-effective Non-standby CATV power supply developed for low current
consumption needs FTTC , FTTX network. Designed for lifetime operation &
delivering energy savings 5-15% energy compared to common P.S.
Integrated power inserter 1218 MHz RF pass & waterproof
housing saving the needs for additional power inserter & enclosures.
New powering option helps operators reduce network
expenditure at capital as well as operational levels while offering optional
remote powering to optical nodes & line extender via coaxial bridge cables.
q
All in one:
Pure AC stabilized P.S with
internal dual Power inserter inside water
proof housing.
q
Simple installation directly to Coaxial
cable.
q
outdoor housing.
q
The Best powering option for deep fiber network.
q
Optional HMS full Monitoring .
q
Savings
of at least 5% energy
compared
to standard
P.S
| T-former 2 8704 | T-former 2 6006 |
| Electrical |
Input Voltage Taps (Vac) | 120±15% | 230±15% |
Input Frequency (Hz) | 50/60 |
Input Current (A) | <2.3 | <1.2 |
Input inrush current | <5In single pulse of 5ms |
Input Power Factor | >0.95 at full load |
Output Voltage Taps (Vac) | 87 | 66 |
Output Current (A) | 4 | 6 |
Short circuit time response (ms) | <10 |
Recovery time delay (sec) | >2 |
Output Power (VA) | 264 |
Load Regulation (%) | <2% |
Output Protection Fuse | T4A |
Efficiency (%) | 95% at full load |
| Mechanical |
Dimensions ( L , W , H ) mm | 250 X 200 X 152 |
Weight (Kg/lbs) | 7.4/16.3 |
Housing Finish | White zinc |
| Environment |
Operating Temperature | -20ºC ÷ +60ºC |
Storage Temperature | -20ºC ÷ +70ºC |
Humidity | 0 ÷ 100% non condensing |
| Standard Features |
Power Mains Cable | √ |
Mains Transients Protection | √ |
Quick Connection Output Coax socket | √ |
Output Fuse | √ |
Output Voltage Test Points | √ |
Output Current Measurement Loop | √ |
Power Indication Green LED | √ |
| Optional Features |
Additional Output Screw Terminals | √ |